Reliable power changeover for mains and standby power systems. Indocap Control Solutions is a trusted Changeover Panel Manufacturer and Supplier .
A Changeover Panel is an electrical switching system used to transfer a connected load between two power sources. For example, in a mains and generator application, the panel can transfer the load from the main electricity supply to the standby generator when mains power is unavailable.
Our panels are designed to help maintain power availability when the primary supply fails. Depending on the application, the changeover system can use circuit breakers or motorized changeover switches to transfer the electrical load from one power source to another.
Choose between automatic transfer with minimal intervention or manual source selection based on your operational preference.
Designed for mains and standby generator power systems, ensuring seamless transfer during power outages and restoration.
Earth fault, under voltage, overload, surge, single phasing, and short circuit protection to safeguard connected equipment.
Available from 100A to 6300A, suitable for diverse industrial, commercial, and infrastructure applications.
1.6 / 2.0 mm CRCA sheet metal with dust-proof gaskets, powder-coated finish, and heavy-duty hinges for durability.
Components from Schneider, Siemens, L&T, Legrand, C&S, Eaton — as per your project requirements.
Our changeover panels are suitable for applications that require a reliable alternative power source to maintain continuity.
| Supply Voltage | 3 Phase, 4 Wire, 440V AC, 50Hz with Earthing Provision |
| Rated Current | 100A to 6300A |
| Rated Insulation | 1100V |
| Ambient Temperature | Up to 45°C |
| Degree of Protection | IP42, IP45, IP55 |
| System Protection | Earth Fault, Under Voltage, Overload, Surge Protection, Single Phasing, Short Circuit |
| Testing | Megger Test, HV Test |
| Busbar | EC Grade Aluminium / Copper with Colour-Coded Heat Shrink Sleeves |
| Switchgear Options | Schneider, Siemens, L&T, Legrand, C&S, Eaton |
| Mounting | Base Frame, Stand, Wall Mounting |
| Cable Entry | Top / Bottom / Side |
| Panel Construction | 1.6 / 2.0 mm CRCA Sheet Metal |
| Finish | 7-Tank Process Powder Coating |
| Standard Colours | RAL 7035 / RAL 7032 |
| Gasket | Dust-Proof Gasket |
| Gland Plate | 2.0 / 3.0 mm with Gasket |
Choose the operating mode that fits your application – fully automatic transfer or manual source selection.
Our changeover panels cover 100A to 6300A, making them suitable for a broad spectrum of power systems.
Using CRCA sheet metal with powder-coated finish, dust-proof gaskets, and heavy-duty construction for long-term durability.
Choose from Schneider, Siemens, L&T, Legrand, C&S, Eaton — components that match your performance and budget needs.
We provide complete installation, commissioning, and after-sales support across Pune and surrounding industrial regions.
Competitive pricing without compromising on quality, ensuring maximum value for your investment in power continuity.
Indocap Control Solutions can provide customized automatic and manual changeover panels designed around your power source and backup requirements.